TOP > PRODUCTS
・POINT SOLDERING MACHINE・ONE-TOUCH NOZZLE LOCK LEVER
POINT SOLDERING MACHINE
・TOP-375 SERIES POINT SOLDERING MACHINE FOR PB FREE
・HIGHER RELIABILITY: NO SOLDER LEAKAGE FROM SOLDER BATH
・ADVANCED POINT SOLDERING MACHINE
・“MORE USEFUL POINT SOLDER” DIGITAL CIRCUIT-FREE POWER SUPPLY
TOP-375
-
TOP-375SP
TOP-375SPH
PB OPTION NOZZLES
TOP-375・375SP・375SPH
- ■Rework in PB free solder. (For dipped parts)
- ■CPU digital circuit for temperature control・switching power supply.
- ■Safe and easy nozzle replacement (old nozzle also can be used)
- ■Solder-flow stand-by mode substantially reduces soldering tact time. (TOP-375・375SP)
- ■Free power supply (AC100, 115&230V) [easy voltage change on terminal board]
- ■Solder bath and heater are made from sus316. (corrode-resist)
- ■Original N2 SPRAY NOZZLE. (option)
- ■The large fender allows used of big nozzle. Simple and easy maintenance and cleaning.
- ■Separate type which resist high temperature. (TOP-375SPH)
- ■Possible to use for Pb-free and Pb solder in the same machine by exchanging solder bath unit.(Unit exchange time: approx. 15 minutes)
N2 SUPPLY UNIT
1)Original N2 SUPPLY UNIT reduce oxide to 1/8~1/10.
2)This is attachable to POINT SOLDERING MACHINE (TOP series) you use now.-
N2 NOZZLE
Original N2 NOZZLE spray N2 effectively against solder flow. Emitting hot N2 have a good effect for preheat.
TOP-375・375SP・375SPH
- Accurate temperature controlled by CPU digital circuit. (±１C°)
- Flow time equipped TOP-375 become even safer when soldering.
- Solder flow stand-by function shorten the tact time for higher efficiency. (TOP-375・375SP)
- One-Touch nozzle lock lever assures safe and easy nozzle change.
- Full area fender is equipped to reduce solder dispention.
- DC brushles motor to control flow level. Switching power supply.
- Original N2 spray nozzle and N2 supply unit reduce oxide to 1/10. (OPTION)
- Solder bath unit style is designed for easy replacement and maintenance.
- Easy targeting with new laser pointing marker. (TOP-375/SP)
SPECIFICATIONS
| TOP-375 | TOP-375SP | TOP-375SPH | |
|---|---|---|---|
| Power supply | AC100~230V 50/60 Hz (exchange voltages on term inal board.) | ||
| Rating | 970W | ||
| Temperature setting | 200~300℃ | 200~300℃ | 200~420℃ |
| Thermo control type | CPU digital (℃/°F exchangeable) | ||
| Heater capacity | SUS316, 920W sheaths heater option: nitride coating | SUS316 + nitride coating 1200W sheaths heater |
|
| Material of solder bath | SUS316 option: nitride coating or titanium | titanium | |
| Stand-by | flow up time, stand-by switch | ||
| Monitor indicator | heater ON, READY (motor interlock), flow display | ||
| Maximum P.C.B. dimension m/m | 600×600 | 200×400 | |
| Dimensions m/m | 280W×558D×180H | 280W×400D×180H | 280W×400D×210H |
| Solder bath dimension m/m | 140W×215D×80H | ||
| Controller dimension m/m | no separate | 280W×150D×150H | |
| Weight | approx. 18kg (except solder) |
approx. 15kg (except solder) / controller approx. 5kg |
|
| Solder capacity | approx. 15kg | ||
| Option | cooling fan, N2 NOZZLE, N2 supply unit, N2 generator | ||
| Accessories | target unit, foot switch, spoon, belt, manual, grease | foot switch, spoon, belt, manual, grease |
|
OPTION NOZZLE (PB TYPE)
| MODEL | DIMENSIONS (OUTER)m/m |
DIMENSIONS (INTER)m/m |
APPLY PARTS |
|---|---|---|---|
| PB-16 | 13×25 | 11×23 | DIP 14～16P |
| 20 | 13×30 | 11×28 | DIP 18～20P |
| 28 | 21×40 | 19×38 | DIP 24～28P |
| 34 | 8×47 | 6×45 | HEADDER 34P |
| 40 | 8×54 | 6×52 | HEADDER 40P |
| 42 | 21×60 | 19×58 | DIP 36～42P |
| 50 | 8×67 | 6×65 | HEADDER 50P |
| 60 | 60×60 | 58×58 | TRANSFORMER, PCB |
| 64 | 25×65 | 23×63 | DIP 54～64P |
| 100 | 20×100 | 18×98 | CONNECTOR |
| 1040 | 12×42 | 10×40 | CONNECTOR |
| 1050 | 12×52 | 10×50 | CONNECTOR |
| 1080 | 12×82 | 10×80 | CONNECTOR |
| 10100 | 12×102 | 10×100 | CONNECTOR |
| 10130 | 12×132 | 10×130 | CONNECTOR |
| 13100 | 15×102 | 13×100 | CONNECTOR |
| 13120 | 15×122 | 13×120 | CONNECTOR |
| 2525 | 27×27 | 25×25 | PGA 64P |
| 3030 | 32×32 | 30×30 | PGA 72P |
| 3535 | 37×37 | 35×35 | PGA 80P |
| 4040 | 42×42 | 40×40 | PGA 88P |
| REMARK H=35 (STANDARD) We make big nozzle and customized nozzle.Maximum dimension: 70×100 |
|||
