TULA.VN - Electronics Materials and Instruments in Vietnam  
       ENGLISH     
Trang chủ | Đối tác | Thư ngỏ | Sơ đồ web | Liên hệ
            
MÁY NẠP Jig test | THIẾT BỊ công cụ | VẬT TƯ hoá chất | LINH KIỆN phụ kiện | DỊCH VỤ GIỚI THIỆU | HỖ TRỢ
 SẢN PHẨM
 Máy nạp rom, Jig test
» Máy nạp rom đa năng
» Máy nạp Gang đa năng
» Máy nạp rom on-board
» Máy nạp chuyên biệt
» Hệ thống nạp tự động
» Phụ kiện đế nạp socket
»Xoá Rom, kiểm tra IC
» Sao chép ổ cứng, thẻ nhớ
»Jig test ICT/FCT/DIP-pallet
 Đo lường và kiểm tra
» Dao động ký oscilloscope
» Thiết bị viễn thông, RF
» Bộ thu thập dữ liệu
» Đồng hồ vạn năng số
» Máy phát xung, đếm tần
» Máy đo LCR, linh kiện
» Bộ đổi nguồn, tải điện tử
» Kit đào tạo, thực hành
 Các công cụ sản xuất
» Máy khò, mỏ hàn thiếc
» Tủ sấy, tủ môi trường
» Dây chuyền SMT Line
» Thiết bị sản xuất PCBA
 Thiết bị, công cụ khác
» Thiết bị Automotive
» Đo lực, cơ điện khác
» Thiết bị quang học
 Linh phụ kiện Điện tử
» Vi điều khiển họ 8051
» Nuvoton ARM Cortex-M
» Nuvoton ARM7/9 Soc
» Chip phát nhạc, audio
» Wireless RF IC, Tools
» Vật tư hàn, rửa mạch
 e-Shop thiết bị, vật tư
 Số lượt truy cập

236612617
lượt xem, tính từ 20/12/2006
 Ai đang online
Hiện tại có 0 khách và 0 thành viên đang online.

Bạn là khách. Bạn có thể đăng kí bằng cách nhấn vào đây



OUR PARTNERS
(Products Line-Card)



Flash Support Group

PEmicro

Power Supply

Shenzhen KESD Technology Co.,Ltd.



Car and Consumer IC Solutions Provider


  

Danh mục nội dung: Chuyên mục chính/2. Thiết bị đo lường và kiểm tra điện tử/2.5. Máy đo LCR và thiết bị đo lường kiểm tra linh kiện điện tử (Tester)


      
  ST-6K: IMPULSE WINDING TESTER (Máy đo xung điện cuộn dây)
  Part#: LEAP ST-6K
  Ghi chú: Máy đo xung điện cuộn dây
  Nhãn hiệu: LEAP (Đài Loan/ Taiwan)
  Bảo hành: 12 tháng/ 12 months
  [ Tài liệu Datasheet ]   [ Báo giá Quotation sheet ]   [ Shopping Shopping now ]   [ Views: 4435 ]   2023-05-30
 ◊ Đặc điểm chính:
ST-6K winding tester is a coil (such as voltage transformer, inductance, motor) testing instrument that tests self-insulating property of the coil. The influences of winding materials, magnetic materials, and framework, also extra fabrication decreases the insulating property of coil layers along with the jumpers and jacks. The ST-6K adopts the technology of high-speed sampling rate to store the sample waveform of the standard (master) coil in the instrument. By comparing the waveform results of the test coil to the master, the defect in the DUT can be found easily. Moreover, the IWT-5000 judges the quality of the testing coil according to the parameter set by the user.

 ◊ Mô tả chi tiết:
ST-6K

Impulse Winding Tester
 
Introduction
 
ST-6K winding tester is a coil (such as voltage transformer, inductance, motor) testing instrument that tests self-insulating property of the coil. The influences of winding materials, magnetic materials, and framework, also extra fabrication decreases the insulating property of coil layers along with the jumpers and jacks.
 
The ST-6K adopts the technology of high-speed sampling rate to store the sample waveform of the standard (master) coil in the instrument. By comparing the waveform results of the test coil to the master, the defect in the DUT can be found easily. Moreover, the ST-6K judges the quality of the testing coil according to the parameter set by the user.
 
Features
  • With 200V~5000V programmable impulse voltage, it is capable of low-energy testing, without damaging the coil.
  • Provide high-speed sampling rate of 100MHz, which enhances the testing ability for partial discharges.
  • 320 x 234 color LCD display clearly for the user to view waveform and test results.
  • Provide user-friendly operation interface.
  • Low inductance during impulse testing, minimum to 0.2uH.
  • Provide 4 kinds of detection modes: AreaSize Comparison, DiffZone Comparison, Corona Amount Comparison, and Corona Number Comparison.
  • The comparative result shows Pass/Fail directly, informing operators the detect test result within a short period of time.
  • Offer measurement functions for voltages, timing and frequencies, which provide user a carry-out analysis in detail.
  • Able to save 360 sets of standard waveform result of the coil for users to download and implement into testing.
  • Provide RS-232 to PC connection. Just using standard text command, you can writing control program and data for communication easily. It's the best way to set up the testing system for mass production.
  • To make analysis easier, ST-6K offers USB 2.0 interface to connect with PC for users to upload or download the parameters of waveforms results.
  • Provide the control function for external I/O, such as the Handler adopts standard D-SUB 15-pin connector for connecting with automatic or semi-auto testing system.
  • Provide self-calibration function. No need to send back for the vendor's calibration. Saving time and cost.
Specification
  • Testing Voltage: 200V~5000V (±3%)
  • Output Energy: 0.25J (Max)
  • Inductance Range Of Test Coil: 0.2μH and above
  • Sampling Rate: 8bit / 10ns (100MHz)
  • Sampling Memory Depth: 5000 Byte
  • Input Resistance: 10MΩ
  • Display Measure: 5.6 inch Colored LCD (320 x 234)
  • Comparison Measures: 
    Area Size Comparison, DiffZone Comparison, Corona Amount, Comparison Corona Number Comparison
  • Storage Wave-forms: 360 Sets of wave-forms
  • Comparison Output: Pass/Fail, beeping
  • Communication: RS-232, I/O, USB 2.0
  • Temperature: 25℃ ~ 40℃
  • Power: 110V/220V AC
  • Frequency Range: 50/60Hz
  • Dimension: 31cm x 15cm x 18cm
  • Weight: 5.3Kg
PC System Requirement
  • Operating System: Windows 98 / 2000 / XP / Vista 32 bits / WIN 7 32 bits





CÁC SẢN PHẨM KHÁC CÙNG NHÀ SẢN XUẤT / OTHER PRODUCTS FROM LEAP
LP-2600L: SMART LOGIC DESIGN EXPERIMENTAL LAB
ST-6K: IMPULSE WINDING TESTER (Máy đo xung điện cuộn dây)
LEAP Electronics Co., Ltd.
LEAPER-1A: HANDY DIGITAL IC TESTER
7.000.000đ
LEAPER-2: Thiết bị kiểm tra IC tương tự cầm tay - HANDY LINEAR IC
670$
LEAP Electronics @ TULA
AH-160: DESKTOP AUTOMATED PROGRAMMER - Hệ thống nạp trình tự động để bàn
AH-480: AUTOMATED PROGRAMMING SYSTEM - Hệ thống nạp trình tự động để bàn
LEAPER 56: Pocket Universal Programmer (LEAP)
LEAP Brochure @ TULA
LEAP released a new lowcost Autohandler Programming System
SU-56: Máy nạp trình đa năng/ Gang Programmer
eMMC Overview: Tổng quan về eMMC
AH-280: AUTOMATED UNIVERSAL PROGRAMMER - Hệ thống nạp trình tự động để bàn



Thao tác người sử dụng: [ Thêm dữ liệu ]

 





ĐIỀU KHOẢN SỬ DỤNG

Công ty TNHH Giải pháp TULA - TULA Solution Co., Ltd
VPGD: Số 6 Ngõ 23 Đình Thôn (Phạm Hùng), Mỹ Đình, Nam Từ Liêm, Hà Nội
Tel.: 024.39655633,  Hotline: 0912612693,  E-mail: 

 
Bản quyền © 2005-2023, Công ty TNHH Giải pháp TULA sở hữuGIỚI THIỆU | HỖ TRỢ