| Máy nạp rom, Jig test |
» | Máy nạp rom đa năng |
» | Máy nạp Gang đa năng |
» | Máy nạp rom on-board |
» | Máy nạp chuyên biệt |
» | Hệ thống nạp tự động |
» | Phụ kiện đế nạp socket |
» | Xoá Rom, kiểm tra IC |
» | Sao chép ổ cứng, thẻ nhớ |
» | Jig test ICT/FCT/DIP-pallet |
| Đo lường và kiểm tra |
» | Dao động ký oscilloscope |
» | Thiết bị viễn thông, RF |
» | Bộ thu thập dữ liệu |
» | Đồng hồ vạn năng số |
» | Máy phát xung, đếm tần |
» | Máy đo LCR, linh kiện |
» | Bộ đổi nguồn, tải điện tử |
» | Kit đào tạo, thực hành |
| Các công cụ sản xuất |
» | Máy khò, mỏ hàn thiếc |
» | Tủ sấy, tủ môi trường |
» | Dây chuyền SMT Line |
» | Thiết bị sản xuất PCBA |
| Thiết bị, công cụ khác |
» | Thiết bị Automotive |
» | Đo lực, cơ điện khác |
» | Thiết bị quang học |
| Linh phụ kiện Điện tử |
» | Vi điều khiển họ 8051 |
» | Nuvoton ARM Cortex-M |
» | Nuvoton ARM7/9 Soc |
» | Chip phát nhạc, audio |
» | Wireless RF IC, Tools |
» | Vật tư hàn, rửa mạch |
| e-Shop thiết bị, vật tư |
|
|
|
Hiện tại có 0 khách và 0 thành viên đang online.
Bạn là khách. Bạn có thể đăng kí bằng cách nhấn vào đây |
OUR PARTNERS
(Products Line-Card)
|
| | Danh mục nội dung: Chuyên mục chính/3. Hệ thống, công cụ và thiết bị phát triển sản xuất điện tử/3.3. Công cụ hàn thiếc, khò IC và gia công PCB lô nhỏ (Soldering tools, rework system)
| | | | ◊ Đặc điểm chính: | |
BK-i350S Introduction
BK-350S is a PCB Rework machine which can desolder and solder plastic mold part, metal part, BGA chip by applying hot air from 2 directions , top and bottom, showing real time temperature profile and enable user to easily set new profile. (User-friendly setting ) BK-350S was developed for optimum rework of small device like mobile phone, navigation device whose PCB size is less than 210mm~261mm . By removing expensive IR heaters which is not effective at small circuit board, realized price competitiveness. Rework station for small device of was realized. BK-350S is a PCB Rework machine which can desolder and solder plastic mold part, metal part, BGA chip by applying hot air from 2 directions , top and bottom, showing real time temperature profile and enable user to easily set new profile. (User-friendly setting)
BK-350S là máy Làm lại PCB có thể khử gỉ và hàn phần khuôn nhựa, phần kim loại, chip BGA bằng cách áp dụng khí nóng từ 2 hướng, trên và dưới, hiển thị hồ sơ nhiệt độ thời gian thực và cho phép người dùng dễ dàng thiết lập hồ sơ mới. (Thiết lập thân thiện với người dùng) BK-350S được phát triển để làm lại tối ưu các thiết bị nhỏ như điện thoại di động, thiết bị định vị có kích thước PCB nhỏ hơn 210mm ~ 261mm. Bằng cách loại bỏ các bộ sưởi IR đắt tiền không hiệu quả ở bảng mạch nhỏ, khả năng cạnh tranh về giá đã được thực hiện. Trạm làm lại cho thiết bị nhỏ của đã được thực hiện. BK-350S là máy Làm lại PCB có thể khử gỉ và hàn phần khuôn nhựa, phần kim loại, chip BGA bằng cách áp dụng khí nóng từ 2 hướng, trên và dưới, hiển thị hồ sơ nhiệt độ thời gian thực và cho phép người dùng dễ dàng thiết lập hồ sơ mới. (Cài đặt thân thiện với người dùng)
|
|
|
BK-350S Features↑ BK-350S Main controller- - High capacity 7 inch touchpanel
- - Cortex-A8 600Mhz CPU
- - 65535 Color 800X480
↑ BK-350S Upper and lower heater- - Each 1200 Watt high capacity heater (Total 2400W)
- - 1~10 easily changeable speed levels for temperature increase at temperature profiles
- - Adjustment of airflow output for hot air
↑ BK-350S PCB holder (RG-105 included)- Designed to hold various shapes of PCB
- PCB holder is not fixed to the table of machine and easily movable from table and let user move PCB holder to his other work station to work on PCB with holder by additonal soldering iron.
↑ BK-350S Temperature setting- Basic temperature profiles are saved for user to change and utilize easily
- Easy change of profile name, target temperature, speed level of temperature increase, maintenance time after target temp
- Storage and backup of temperature profiles
↑ BK-350S Working display- Real-time display of temperature profile with time for upper heater(red) and lower heater(green)
- Using included external thermocouple, user can find rough actual temperature (blue).
↑ BK-350S suction pencil (to pick up desoldered parts)- After alarm beep of heating, turn knob of upper heater and click SUCTION button
- then cover hole on pencil and pick up desolder parts , vacuum is used by 64Kpa, 7L/m high capacity suction pump. (Metal end tip of pencil should be connected with rubber by fully buried shape.)
↑ BK-350S Upper and lower nozzles- Permanent magnets were used for eaiser detachment and mounting
- According to various chip sizes, 8pcs of different free nozzles are supplied
- Each nozzle has bottom size and by chip size, select a little larger nozzle.
↑ BK-350S Lighting- Convenient observation of targeted chip by high brightness lithe LED lamp
- Red-light pointer to check center of chip (To adjust PCB fixture may make user more convenient)
- Red-light pointer is used to work the same PCB of same part to adjust position of chip against center of nozzle
↑ BK-350S USB PORT- Storage and backup of temperature profiles by USB
- USB, wireless, wired mouse, keyboard
CÁC SẢN PHẨM KHÁC CÙNG NHÀ SẢN XUẤT / OTHER PRODUCTS FROM REGENI |
|
|
| | |
ĐỐI TÁC QUỐC TẾ
Minato, Leap, SMH-Tech, Xeltek, Elnec, Conitec, DediProg, Phyton, Hilosystems, Flash Support Group, PEmicro || Rigol, Tonghui, Copper Mountain, Transcom, APM || Atten, Zhuomao, Puhui, Neoden, Ren Thang, Genitec, Edry, UDK ||
|