70-1228: Đế nạp Top TSOP48 ZIF 18.4mm   Part#: ELNEC 70-1228   Ghi chú: Dùng cho máy nạp rom ELNEC       [last update: 2024-09-10 (26)]   Nhãn hiệu: ELNEC (Slovakia)   [ Tài liệu ]   [ Báo giá ]   [ Shopping ]   [ Views: 5248 ]   2021-10-27  ◊ Đặc điểm chính: top board of TSOP48 adapters (mainly FLASH EPROM with 48-pins) operating (mechanical) warranty of ZIF socket - 10,000 actuations Ord. no. 70-1228 Socket ZIF TSOP48, OpenTop type Bottom 2x24 + 1x3 pins, square, 0.6x0.6mm Class Specialized Subclass Memory (NOR/NAND/eMMC)

Adapter manual

• For work with TSOP48 device it is necessary put together Top TSOP48 ZIF 18.4mm with some Bottom TSOP48-x board according to the information provided by PG4UW software.
• The picture show, how to put together the Top TSOP48 ZIF 18,4mm and Bottom TSOP48-x boards to have complete TSOP48 adapter.
• Insert comlete adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
• Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. Then release adapter ZIF socket.
• Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is ready for programming.
• Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ZIF socket can damage the programmed device.
• To take out the device push the top of adapter ZIF socket and remove device from it.
• When you finish work with adapter, remove it from the device programmer ZIF socket.
• Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
• For handling with the device we recommended to use a vacuum pick up tool.
• Operation conditions: operating temperature 5°C ÷ 40°C (41°F ÷ 104°F), operating humidity 20%..80%, non condensing.

 

Accepted package(s)

TSOP48

70-1270A: Đế nạp DIL8W/SOIC8 ZIF 200mil SFlash-1a	BeeHive204AP: Multiprogrammer for automated programming systems	Elnec s.r.o.: Thông tin về nhà sản xuất ELNEC	72-0011: Credit box CB-25k
BeeHive204: Multiprogramming system	BeeHive208S: Stand-alone Multiprogramming system	SmartProg2: Universal very fast programmer, USB Port and ISP capability, 40 Pins 11.500.000đ	BeeProg2: Extremely fast universal programmer and ISP capability
NRU-0083: Vacuum pen - bút chân không nhặt chip	BGA converters introduction: Giới thiệu về đế nạp kiểu BGA	Đế nạp: IC programming sockets (socket-unit, socket-adapter, socket-converter)	BeeProg3: Ultra speed universal 64-pindrive programmer, máy nạp rom đa năng 64-pin driver
BeeHive304: Ultra speed universal 4x 64-pindrive production multiprogrammer, Máy nạp rom đa năng 4 kênh 64-pin driver 7900$	PIKprog2 & T51prog2: ELNEC @ Discontinued	BeeProg2C: Extremely fast universal USB interfaced programmer	BeeProg2C & BeeProg+: ELNEC @ Discontinue BeeProg+ and release new model BeeProg2C
NRU-0085: Fiberglass pen, Bút sợi quang 250.000đ	KKO-0113: ZIF Socket DIL48, Đế nạp DIL48 kiểu kẹp ZIF	70-3081: Đế nạp DIL48/TSOP48 ZIF 18.4mm NAND-3	70-1277: Đế nạp DIL8W/TSSOP8 ZIF 170mil SFlash-1
70-3077: Đế nạp DIL48/TSOP56 ZIF 18.4mm NOR-4	70-1272A: Đế nạp DIL16W/SOIC16 ZIF 300mil SFlash-1a	ELNEC update latest released information - Cập nhật mới nhất từ Elnec	70-0079: Đế nạp DIL48/PLCC84 ZIF PLD-1
70-1227: Đế nạp Bottom TSOP48 NOR-1	70-1228: Đế nạp Top TSOP48 ZIF 18.4mm	70-1275A: Đế nạp DIL8/QFN8-5 ZIF-CS SFlash-1a	70-3081: Đế nạp DIL48/TSOP48 ZIF 18.4mm NAND-3
70-1272A: Đế nạp DIL16W/SOIC16 ZIF 300mil SFlash-1a